Loading... Please wait...
  • Image 1
  • ADAMS RITE 36"  CVR SE MOTORIZED LATCH RETRACTION PANIC DEVICE ANDO BRZ

Silent Electrified

8622-SE-36

Finish 313 Anodized Bronze

 The series 8600 Concealed Vertical Rod (CVR) exit device for metal stile glass door provides for the safety and security by use of a rotation top bolt and post type header strike.

This bolt deadlatches around its strike post (similar to the safety latches used in some autos and aircraft). Action of the top bolt deadlocks the bottom bolt as well. Bottom bolt is hardened steel, with a conical tip to center in the simple drilled strike hole required to the threshold.

Stile preparation for Series 86—CVRs is extremely simple, consisting only of drilled holes and one simple notch. No thread tapping or cutout shapes required.

Series 8600 devices are not handed to fit either LHR or RHR doors. Standard device will fit most 1 ¾” thick stiles with minimum 1.26” (32mm) inside dept to clear mechanism. Standard units accommodate any bar height form 30 inches to 44 inches and any door height up to 66 inches above the bar. For taller doors specify accessory “tall door” kit with provide for door up to 92” above bar. Doors with still wall thicker or thinner than nominal 1/8” require factory modification to the device. Doors with overall thinness greater than 1 ¾” also require special modification to device if cylinder or entry trim actuation from outside is required.

Adams Rite 36” CONCEALED VERTICAL RODS MOTORIZED LATCH RETRACTION PANIC DEVICE ANODIZED BRONZE 8622-SE-36

Price:
$977.00
SKU:
8622-SE-36
Shipping:
Free Shipping
Quantity:

Product Description

ADAMS RITE 36"  CVR SE MOTORIZED LATCH RETRACTION PANIC DEVICE ANDO BRZ

Silent Electrified

8622-SE-36

Finish 313 Anodized Bronze

 The series 8600 Concealed Vertical Rod (CVR) exit device for metal stile glass door provides for the safety and security by use of a rotation top bolt and post type header strike.

This bolt deadlatches around its strike post (similar to the safety latches used in some autos and aircraft). Action of the top bolt deadlocks the bottom bolt as well. Bottom bolt is hardened steel, with a conical tip to center in the simple drilled strike hole required to the threshold.

Stile preparation for Series 86—CVRs is extremely simple, consisting only of drilled holes and one simple notch. No thread tapping or cutout shapes required.

Series 8600 devices are not handed to fit either LHR or RHR doors. Standard device will fit most 1 ¾” thick stiles with minimum 1.26” (32mm) inside dept to clear mechanism. Standard units accommodate any bar height form 30 inches to 44 inches and any door height up to 66 inches above the bar. For taller doors specify accessory “tall door” kit with provide for door up to 92” above bar. Doors with still wall thicker or thinner than nominal 1/8” require factory modification to the device. Doors with overall thinness greater than 1 ¾” also require special modification to device if cylinder or entry trim actuation from outside is required.