Loading... Please wait...
  • Lock body ML180 (storeroom) – Outside lever locked (EL) or unlocked (EU) electronically.  Latchbolt retracted by key outside or lever inside.  Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

COMMAND ACCESS 24V ELEC ML1 LOCK BODY ONLY

RRP:
$365.00
Your Price:
$227.50 (You save $137.50)
SKU:
CMACH-ML180EU-24
Shipping:
Calculated at checkout
Quantity:

Product Description

24V ELEC ML1 LOCK BODY ONLY COMMAND

COMMAND ACCESS ML1

The Command Access ML1 series lock offers the quality and features found in premium-quality, domestically made ANSI grade 1 mortise locks, yet at a significantly lower cost. The electrification and part tolerance maintenance is done here in the USA to ensure CAT’s high quality standards are met. The ML1’s chassis and trim are compatible with the Schlage “L” series locks so retrofitting to Schlage prep is never a problem.

ML180 (storeroom) – Outside lever locked (EL) or unlocked (EU) electronically.  Latchbolt retracted by key outside or lever inside.  Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

Finishes available: 613, 625, 626

Features:

  • UL Listed
  • Continuous duty solenoids allow for “continuously on” applications such as Fail Safe or an unlock cycle
  • Plug-in bridge rectifier that allows for an AC or DC power source
  • Low current draw
  • Compatible with Schlage “L” series mortise trim.
  • No hassle 3-Year Warranty

Options:

  • Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked)
  • Voltage options - 12V or 24V(AC/DC)
  • REX - Request to Exit or AE switch available
  • LBM - Latchbolt Monitor switch available
  • DPS - Door Position switch available
  • DBM - Deadbolt Monitor switch available
  • SLM - Solenoid Monitor switch available
  • SCM - Security Monitor switch available
  • CRU2 - Current Reduction Unit to improve solenoid life in “continuously on” applications
  • CRU2i - The intelligent CRU2: automatically detects DC input voltage between 12 to 30 volts and converts it to operate our 12V locks. Additionally, it adjusts the current to the solenoid allowing the lockset to run cooler and last longer without any manual adjustments.

Specifications:

  • Operating Voltage – 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering)
  • Amperage – 12V = 700 mA / 24V = 350mA
  • Solenoid coil resistance – 12V = 18 Ω 24V = 69 Ω
  • Power consumption – 8 watts